Materials

14 filaments we run in series.

Every material here has a tuned batch profile on our machines. If yours is not listed, ask — we add materials when a job justifies the qualification run.

Standard

Everyday production parts, widest colour range, lowest cost.

PLA

Standard
€

The workhorse for visual parts and anything that lives indoors at room temperature.

  • Best surface finish
  • Widest colour range
  • Lowest cost
  • Dimensional accuracy
Nozzle
190–220 °C
Bed
55–60 °C
Chamber
Open
Colours
16

Use for Display models · Promotional items · Prototypes · Indoor consumer products

PLA-CF

Standard
€€

PLA stiffness with a premium matte carbon look. Layer lines all but disappear.

  • Matte carbon finish
  • Stiffer than PLA
  • Hides layer lines
Nozzle
210–240 °C
Bed
55–60 °C
Chamber
Open
Colours
1

Use for Brackets · Covers · Visual engineering parts

PETG

Standard
€

Our default for functional parts: tougher than PLA, easy to print consistently across a batch.

  • Tough and slightly flexible
  • Chemical resistance
  • Food-contact grades available
  • Up to ~75 °C
Nozzle
230–250 °C
Bed
70–80 °C
Chamber
Open
Colours
16

Use for Enclosures · Jigs and fixtures · Containers · Mechanical parts

Engineering

Heat, impact, UV and load — printed in heated chambers.

PETG-CF

Engineering
€€

A stiff, low-warp carbon composite that prints like PETG.

  • Rigid
  • Low warp
  • Matte finish
  • Good creep resistance
Nozzle
240–270 °C
Bed
70–80 °C
Chamber
Open
Colours
1

Use for Fixtures · Drone frames · Structural brackets

ABS

Engineering
€

Classic engineering plastic. Printed in heated chambers for dimensional stability.

  • Impact resistant
  • Up to ~90 °C
  • Vapour-smoothable
  • Machinable
Nozzle
250–270 °C
Bed
90–100 °C
Chamber
Heated
Colours
4

Use for Housings · Automotive interior · Handles and knobs

ASA

Engineering
€€

ABS for the outdoors: holds colour and strength under sun and rain.

  • UV and weather resistant
  • Up to ~95 °C
  • Impact resistant
  • Vapour-smoothable
Nozzle
250–270 °C
Bed
90–100 °C
Chamber
Heated
Colours
4

Use for Outdoor enclosures · Automotive exterior · Signage · Garden and marine parts

PC

Engineering
€€€

Polycarbonate for parts that must survive heat and impact.

  • Very high impact strength
  • Up to ~110 °C
  • Optical clarity available
  • Flame-retardant grades
Nozzle
270–300 °C
Bed
100–110 °C
Chamber
Heated
Colours
3

Use for Protective covers · Lighting · Electrical housings

PA (Nylon)

Engineering
€€€

Tough, slippery nylon for moving parts and clips that flex thousands of times.

  • Wear resistant
  • Fatigue resistant
  • Living hinges
  • Low friction
Nozzle
260–290 °C
Bed
80–100 °C
Chamber
Heated
Colours
2

Use for Gears · Bushings · Snap-fit parts · Cable guides

PA-CF

Engineering
€€€€

Carbon-fibre nylon: the closest FDM gets to a machined aluminium part.

  • Highest stiffness-to-weight
  • Up to ~150 °C
  • Low warp
  • Excellent surface
Nozzle
270–300 °C
Bed
80–100 °C
Chamber
Heated
Colours
1

Use for Structural brackets · Drone and robotics parts · Tooling · Metal replacement

PA-GF

Engineering
€€€€

Glass-filled nylon: stiff like PA-CF with more impact tolerance.

  • High stiffness
  • Better impact than PA-CF
  • Up to ~140 °C
Nozzle
270–300 °C
Bed
80–100 °C
Chamber
Heated
Colours
2

Use for Housings under load · Industrial fixtures · Automotive brackets

PET-CF

Engineering
€€€

A carbon composite that shrugs off humidity where nylon would swell.

  • Low moisture uptake
  • Up to ~140 °C
  • Chemical resistance
  • Dimensionally stable
Nozzle
260–290 °C
Bed
80–90 °C
Chamber
Heated
Colours
1

Use for Under-hood parts · Pump and fluid housings · Fixtures in wet environments

Flexible

Rubber-like parts with repeatable hardness.

TPU 95A

Flexible
€€

Flexible parts in series — seals, feet, grips — with consistent shore hardness.

  • Rubber-like flexibility
  • Abrasion resistant
  • Tear resistant
  • Vibration damping
Nozzle
220–240 °C
Bed
40–60 °C
Chamber
Open
Colours
7

Use for Gaskets and seals · Bumpers and feet · Grips · Protective cases · Wearables

High-temp composites

Up to 200 °C on our 350 °C hotends.

PPS-CF

High-temp
€€€€€

Our highest-performance filament, printed on 350 °C hotends in heated chambers.

  • Up to ~200 °C
  • Chemical and fuel resistant
  • Flame retardant
  • Very low creep
Nozzle
310–340 °C
Bed
100–120 °C
Chamber
Heated
Colours
1

Use for Engine-bay components · Chemical process fixtures · Electrical insulators

PPA-CF

High-temp
€€€€€

High-temperature polyphthalamide composite for parts that replace metal under heat.

  • Up to ~180 °C
  • Very high strength
  • Low moisture uptake vs PA
  • Fatigue resistant
Nozzle
300–330 °C
Bed
90–110 °C
Chamber
Heated
Colours
1

Use for High-load brackets · Powertrain fixtures · Aerospace tooling

Colour

Sixteen standards. Custom from 500 parts.

PLA and PETG ship in 16 stock colours; engineering grades in black, white, grey and natural. Multi-colour parts print in one piece on the AMS — logos, markings, colour-coded variants — with no painting step. For brand colours we source custom-run filament on batches above 500 parts; send the reference and we match on a sample first.

Upload a file. See the price before you talk to anyone.

Pick a material on the quote page and the estimate updates instantly.