Service 01 · Batch 3D printing

Series production, without the mould.

One file, 25 identical printers, one recipe. We run your part in parallel across the farm and ship a batch that looks like it came from a single machine — because, as far as the profile is concerned, it did.

What we print

End-use parts, in quantities a mould can't justify.

  • Enclosures and housings — sensor nodes, controller boxes, gateways. Inserts fitted, cable glands tapped.
  • Brackets, mounts and clips — in PETG, ASA or PA-CF depending on load and environment.
  • Jigs, fixtures and gauges — for your own line, with drawings and a measured first article.
  • Spare parts — reverse-engineered from the worn original when the OEM no longer stocks it.
  • Merchandise and rewards — multi-colour, bagged per SKU, labelled with your artwork.
  • Bridge production — the first 500–5,000 units while the injection tool is being cut.

Process specification

The numbers we hold ourselves to.

Written down so you can design to them. If a job needs tighter limits, we print a first article, measure it and adjust before the run.

TechnologyFDM / FFF on Bambu Lab P2S, X2D, H2S, H2D, H2C
Maximum part350 × 320 × 340 mm (larger parts split and bonded)
Layer heights0.08 / 0.12 / 0.16 / 0.20 / 0.28 mm — 0.20 mm standard
Nozzles0.4 / 0.6 / 0.8 mm hardened steel
Dimensional tolerance±0.2 mm up to 100 mm · ±0.2 % above
Minimum wall1.2 mm at 0.4 mm nozzle
Hotend / chamberup to 350 °C · 65 °C actively heated
Multi-materialAMS on every machine · dual nozzle on X2D / H2D · 7-material Vortek on H2C
Batch consistencyOne profile, one filament lot, one machine class per batch · first article photographed · sample inspection by batch size

Materials

14 filaments, four families.

MaterialFamilyNozzleChamberStrengthsTier
PLAstandard190–220 °COpenBest surface finish, Widest colour range, Lowest cost€
PLA-CFstandard210–240 °COpenMatte carbon finish, Stiffer than PLA, Hides layer lines€€
PETGstandard230–250 °COpenTough and slightly flexible, Chemical resistance, Food-contact grades available€
PETG-CFengineering240–270 °COpenRigid, Low warp, Matte finish€€
ABSengineering250–270 °CHeatedImpact resistant, Up to ~90 °C, Vapour-smoothable€
ASAengineering250–270 °CHeatedUV and weather resistant, Up to ~95 °C, Impact resistant€€
PCengineering270–300 °CHeatedVery high impact strength, Up to ~110 °C, Optical clarity available€€€
PA (Nylon)engineering260–290 °CHeatedWear resistant, Fatigue resistant, Living hinges€€€
PA-CFengineering270–300 °CHeatedHighest stiffness-to-weight, Up to ~150 °C, Low warp€€€€
PA-GFengineering270–300 °CHeatedHigh stiffness, Better impact than PA-CF, Up to ~140 °C€€€€
PET-CFengineering260–290 °CHeatedLow moisture uptake, Up to ~140 °C, Chemical resistance€€€
TPU 95Aflexible220–240 °COpenRubber-like flexibility, Abrasion resistant, Tear resistant€€
PPS-CFhigh-temp310–340 °CHeatedUp to ~200 °C, Chemical and fuel resistant, Flame retardant€€€€€
PPA-CFhigh-temp300–330 °CHeatedUp to ~180 °C, Very high strength, Low moisture uptake vs PA€€€€€

Full datasheets, colours and use cases →

Quality

How part 500 matches part 1.

  1. First article. One part printed, photographed, measured against your drawing. Nothing runs until you approve it.
  2. Frozen recipe. The approved profile, filament lot and machine class are locked for the batch. Changing any of them means a new first article.
  3. Inline inspection. Visual check of every part; dimensional sampling by batch size (ISO 2859-style AQL on request).
  4. Cosmetic zones. Tell us which faces are visible. We orient for them and inspect them harder.
  5. Traceability. Each bag carries the SKU, batch ID and print date. Reorders use the same recipe.

Finishing

Priced per part, added on the quote.

Support removal and a visual check are included in every part. Everything else is a line item you can tick on or off.

Sanding (visible faces)from €2.50
Primed, ready to paintfrom €4.00
Vapour smoothing (ABS/ASA)from €3.50
Heat-set threaded insertsfrom €1.50
Multi-part assemblyfrom €6.00

Lead times

Scheduled across the farm, not queued behind it.

Samples

2–3days

1–5 parts, credited against the batch that follows.

Batches

3–5days

up to 500 small parts, standard materials.

Large runs

7–10days

1,000+ parts or large formats. Scheduled deliveries available.

Business days from first-article approval. Courier adds 1–3 days inside the EU. The quote page estimates lead time from your actual quantities.

Volume pricing

Discounts on the part of the price that actually scales.

Discounts apply to machine time and handling. Material is charged at cost plus waste. Setup is a fixed €3 per file, spread across the quantity.

  • 1+list price
  • 10+−5 %
  • 50+−15 %
  • 100+−20 %
  • 500+−30 %
  • 1,000+−35 %

Design for batch FDM

Seven rules that cut the price per part.

Every file gets a free manufacturability review. These are the changes we suggest most often.

Overhangs up to 45°

Print without supports, which means no support scars and a lower price per part.

Chamfer the underside instead of a fillet

A 45° chamfer prints clean; a round fillet needs support on its lower half.

Walls ≥ 1.2 mm, features ≥ 0.8 mm

Three perimeters at a 0.4 mm nozzle make a wall that is solid, not a single bead.

Holes: design 0.2 mm oversize or let us ream

FDM holes print slightly small. Tell us the fit you need and we tune it on the first article.

Orient for strength along the layer, not across it

Parts are strongest in the XY plane. We orient for load, you tell us where the load is.

Threads: use heat-set inserts for M3 and up

Printed threads wear; brass inserts give a metal thread for €1.50 a part.

Avoid large flat bases in ABS and ASA

Heated chambers help, but mouse-ears or a small raft keep corners down on 200 mm+ plates.

FAQ

Batch questions.

01Can you match a Pantone or RAL colour?

We work from stock filament colours (16 standards in PLA and PETG, fewer in engineering grades) and can source custom colours for runs above 500 parts. Send the reference and we will show you the nearest match on a sample.

02What happens if a part fails inspection?

It does not ship. We reprint at our cost; the batch date moves only if the failure is in your file, and we tell you before that happens.

03Do you offer scheduled or call-off deliveries?

Yes. Agree a quantity and a cadence (weekly or monthly) and we print ahead of each call-off so you hold no inventory. The price uses the full agreed quantity.

04Can you print multi-colour parts in series?

Every machine has an AMS, so two- to four-colour parts (logos, markings, colour-coded variants) print in one piece without painting. Colour changes add print time, which the quote shows.

Upload a file. See the price before you talk to anyone.

Drop an STL or STEP. Volume pricing is calculated in your browser.